Clean the ADF rollers
You should clean the rollers in the ADF if you are experiencing misfeeds or if your originals show marks
as they exit the ADF.
CAUTION: Cleaning the rollers too frequently could introduce dust into the device.
1. Open the scanner lid.
2. Locate the rollers near the vinyl calibration strips.
3. Wipe the rollers gently with a clean, water-dampened, lint-free cloth.
CAUTION: Do not pour water directly onto the rollers. Doing so might damage the device.
4. Close the scanner lid.
5. Push the release button to open the ADF cover.
22 Chapter 3 Maintenance ENWW
To Next Page
Loading...
