33
Making the hardware connection:
1. Set up the NAT box between the internal LAN and the multi-server LAN.
2. Use the second BX25G-xx cable to connect the NAT box’s WAN
connection to an ethernet card in the PC. If you followed the directions
for setting up the NAT box, the WAN side of the NAT box has an address
of 90.0.100.1
3. Start a telnet session on your PC to address <nat box address>:23 (23 is
the PMUs port address)
4. The MBM> prompt should appear on your PC
Refer to the AMS 1.1.0 CD for instructions on installing and using the
AlphaServer Management Utility (AMU) from a PC running windows.
To Next Page
Loading...
Need help?
General