AlphaServer ES47/ES80/GS1280
Server Management
Command Line Interface
CLI Reference
Version 3.0
October 2003
This document describes the Server Mangagement Command Line Interface
(CLI) to hp AlphaServer ES47/ES80/GS1280 systems.
The CLI provides access to the whole platform at the most fundamental level.
You can display information, such as the system configuration, cabling, and
environmental component status. You can update the firmware and power the
system or a hard partition on or off, as well as halt and reset. You can create
and delete partitions.
The CLI also provides one of the two ways you can access the SRM console or
operating system running within the system or a partition.
Need help?
To Next Page
General