35
Making the hardware connection:
1. Set up the NAT box between the internal LAN and the multi-server LAN.
2. Use the second BX25G-xx cable to connect the NAT box’s WAN
connection to the HUB set up for the multi-server LAN.
3. Set up the AMS on the multi-server LAN.
4. Set up the AMS on the corporate LAN.
5. Install the AMS software using its installation and user documentation.
Refer to the AMS 1.1.0 CD for instructions on installing and using the
AlphaServer Management Station (AMS) from an AlphaServer workstation
running Tru64 UNIX.
To Next Page
Loading...
Need help?
General