HP AlphaServer ES80 Installation Information

58
On this screen change the IP address from 192.168.2.1 to 10.253.0.2.
(this now becomes the address of the NAT box on the internal LAN.)
Leave the subnet mask as is and disable the NAT box’s DHCP Server.
(When you disable the DHCP server, the IP address pool addresses are
ignored.)
Once the IP address is entered and Disable DHCP is selected, press
Enter.

HP AlphaServer ES80 Specifications

General

Brand	HP
Model	AlphaServer ES80
Category	Server
Language	English