Hardware options installation 42
IMPORTANT: When removing the two parts of the riser board, pay attention to the orientation of the slots
on each side. This information is important for subsequent procedures.
7. Install the PCI Express riser board.
8. Install any PCI Express expansion boards ("Expansion board" on page 39).
9. Install the PCI riser board assembly ("Installing the PCI riser board assembly" on page 18).
IMPORTANT: The server will not power up if the PCI riser board assembly is not seated properly.
10. Install the access panel ("Installing the access panel" on page 17).
11. Install the server into the rack ("Installing the server into the rack" on page 25).
To Next Page
Loading...
