Troubleshooting 66
Server fault indications flowchart
Symptoms:
• Server boots, but a fault event is reported by Insight Management agents (on page 49)
• Server boots, but the internal health LED or external health LED is red or amber
NOTE: For the location of server LEDs and information on their statuses, refer to the server documentation.
Possible causes:
• Improperly seated or faulty internal or external component
• Unsupported component installed
• Redundancy failure
• System overtemperature condition
Item Refer to
1
"Management agents (on page 49)" or in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the HP
website (http://www.hp.com/support
).
To Next Page
Loading...
