003 Lower Cassette Test
June 1999 Diagnostic Tests 5-5
003 Lower Cassette Test
1 Make sure the lower paper cassette is installed with paper, the side and rear guides
securely against the edges of the paper in the cassette.
2 Go to: 003
3 Press: READY to run the test.
4 Refer to the chart below to confirm that the code that displays corresponds to the
paper size in the cassette. (For example, if the cassette holds letter size paper, “1-3”
should appear on the display.) This indicates the paper size sensor is working properly.
Table 5-1, “Paper Size Codes”, lists the paper size codes.
5 Press: STOP to exit.
(004 intentionally excluded)
A 1-9 is displayed when a high-capacity paper feed unit is
installed; refer to “021 - High Capacity Unit Input Test”
Note
To Next Page
Loading...