HP C30 - Lower Cassette Mount Removal

Lower Cassette Mount Removal
June 1999 Removal/Replacement Procedures 7-45
Lower Cassette Mount Removal
To remove the lower cassette mount:
1 Open the front, back, and top covers.
2 Duplex only: Remove the duplex tray.
3 Remove the upper and lower paper cassettes.
4 Remove the left side cover (see page 7-8).
5 Remove the paper feed drive cover (three screws).
6 Remove the power control board cover (one screw).
7 Remove the power control board (see page 7-38).
8 From the back, remove the two screws holding the lower cassette mount in place.
Mounting Screws
Back Detail
Power Control Board
Paper Feed Drive Cover
Power Control
Board Cover