HP C30 - Back Cover Interlock Switch Removal

Back Cover Interlock Switch Removal
7-82 Removal/Replacement Procedures June 1999
Back Cover Interlock Switch Removal
To remove the back cover interlock switch:
1 Open the front, top, and back covers.
2 Duplex only: Remove the duplex tray.
3 Remove the upper and lower paper cassettes.
4 Remove the left side cover (see page 7-8).
5 Remove the AC power supply (see page 7-29).
6 Remove the AC power supply side cover (one screw).
7 Disconnect the four wires connected to the interlock switch.
8 Remove the back cover interlock switch (two screws).
Wires
Side Cover
Back Cover Interlock Switch Detail
AC Power Supply