TAG 025: Paper in Input Area Before Printing
June 1999 Troubleshooting Analysis Guide (TAGs) 3-41
6
Turn the printer off and unplug the power cord.
• Loosen the paper timing guide.
• Disconnect J/P57 and J/P40.
• Check the following for continuity:
• P40-16 to P57-2
• P40-25 to P57-1
• P40-12 to P57-3
Is there continuity?
No: Repair or replace the connectors or wiring from:
• P40-25 to J/P58-1 to P57-1
• P40-16 to J/P58-2 to P57-2
• P40-12 to J/P58-3 to P57-3
Then turn to TAG 002: Check & Problem Resolution.
Yes: Replace the paper timing guide. If that doesn’t resolve the problem, replace the PCL
board. Then turn to TAG 002: Check & Problem Resolution.
To Next Page
Loading...