Configuring the Printer with the Device Pages 19
The table below describes each of the menus.
Menu Name Description
Information Menu This menu contains printer information pages that
give details about the printer and its configuration.
Paper Handling
Menu
Using this menu, you can set the type of paper in
each tray.
Printing Menu In this menu, you can select printing options, such
as number of copies. You can also configure
custom paper size.
Configuration
Menu
Items in this menu affect the printer’s behavior. For
example, you can configure PowerSave and printer
personality settings from this menu.
I/O Menu Items in the I/O (input/output) Menu affect the
communication between the printer and the
computer.
Resets Menu Use this menu with caution. You can lose buffered
page data or printer configuration settings when you
select these items. Only reset the printer under the
following circumstances:
•
You want to restore the printer’s default settings.
•
Communication between the printer and
computer has been interrupted.
•
You are having problems with a port.
Note
If there isn't communication between the printer and
your computer, you won’t be able to reset the
printer.
The items in the Resets Menu will clear all memory
in the printer, while the Cancel Job button clears
only the current job. You can access the Cancel Job
button from the Security page. (For more
information, see page 35.)
Note
After performing a reset you will need to configure
the printer IP address.
To Next Page
Loading...
Need help?
General
