2. Slide open the paper length and width guides
by pushing outward on the blue tabs.
3. To load Legal-size paper, extend the tray by
pressing the release button at the back of the
tray inward and pulling the back of the tray
out.
NOTE: When loaded with Legal-size paper,
the tray extends from the rear of the product
approximately 70 mm (2.75 in).
4. Place the paper in the tray and make sure that
it is flat at all four corners. Slide the paper
length and width guides so that they are
against the stack of paper.
ENWW
Load the input trays
19
To Next Page
Loading...