31. Install the spring.
TAKING TEST PRINTS
Supplies Status Page
1. Press OK to open the menus
2. Scroll until “REPORTS” appears on the display
3. Press OK
4. Scroll to the Supplies Status Menu
5. Press OK
6. Scroll until “Print Supplies Status Page” appears on the display
7. Press OK
REPETITIVE DEFECT CHART
Cartridge Station Pitch 67.0mm
ITB 66.7mm
OPC Drum 63.0mm
Fuser Pressure Roller 56.5mm
Fuser Sleeve 56.5mm
Transfer Rollers 51.5mm
Registration Roller 44.0mm
Primary Charge Roller 23.6mm
Developer Roller Sleeve 22.6mm
Output Kicker Rollers 11.0mm
HP PRO M452 / MFP 477 (CF410/11/12/13 A/X-HP 410 SERIES) TONER CARTRIDGE REMANUFACTUIRNG INSTRUCTIONS
© 2017 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
www.uninetimaging.com
To Previous Page
Loading...
