HP PRO M452 / MFP 477 (CF410/11/12/13 A/X-HP 410 SERIES) TONER CARTRIDGE REMANUFACTUIRNG INSTRUCTIONS
© 2017 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
www.uninetimaging.com
12. On the supply chamber, remove the two screws from the gear side end cap.
Remove the end cap.
Be careful of the spring-loaded drum drive gear. It will come loose.
13. Remove the two gears. 14. Pry off the white inner end cap.
To Next Page
Loading...
