HP Chromebook 11 G6 EE User Manual

TouchPad
NOTE: The TouchPad spare part kit does not include the TouchPad cable. The TouchPad cable is included in
the Cable Kit, spare part number L14906-001, and includes double-sided adhesive.
Description Spare part number
TouchPad L14922-001
Before removing the TouchPad, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see Keyboard/top cover on page 20).
Remove the TouchPad:
1. Release the shielding material (1) that covers the top edge of the TouchPad.
2. Detach the TouchPad cable (2) from the keyboard/top cover. (The TouchPad cable is attached to
the keyboard/top cover with double-sided adhesive.)
3. Remove the three Phillips M2.0×2.7 screws (3) that secure the TouchPad and TouchPad bracket to
the keyboard/top cover.
4. Remove the three Phillips M2.0×2.2 broad head screws (4) that secure the TouchPad to the keyboard/
top cover.
5. Remove the TouchPad bracket (5).
The TouchPad bracket is available using spare part number L18300-001.
24 Chapter 5 Removal and replacement procedures

HP Chromebook 11 G6 EE Specifications

General

Graphics	Intel HD Graphics 500
Operating System	Chrome OS
Battery Life	Up to 13 hours
Processor	Intel Celeron N3350
RAM	4GB
Storage	16GB eMMC
Display	11.6-inch HD (1366 x 768)
Wireless	Bluetooth 4.2
Ports	1 x headphone/microphone combo