What to do if the port is improperly configured on HP Server?
If a port on your HP Server is improperly configured or in a blocking state, review the port configuration settings to ensure they are correct.
What to do if network port LED is blinking on HP Cluster Platform Introduction v2010 Server?
If the network port LED is blinking, it means that the port has experienced a self-test or initialization failure. Inspect the port and rectify any configuration issues.
How to fix HP Cluster Platform Introduction v2010 Server interconnect software failure?
If your HP Server interconnect experiences a software failure during self-test, reset the switch and perform the self-test again.
What to do if HP Cluster Platform Introduction v2010 interconnect hardware failure has occurred?
If an interconnect hardware failure has occurred on your HP Server and all the LEDs stay on indefinitely, replace the faulty hardware.
Describes the intended audience for the manual and their assumed knowledge.
Outlines the structure of the manual and the topics covered in each chapter.
Details documentation available for individual cluster components like servers and switches.
Provides links to websites for third-party tools, compilers, and utilities used with the cluster.
Suggests terms and websites for finding HP-specific documentation and information.
Provides guidelines to avoid electrical hazards when working with cluster components.
Addresses safety precautions related to laser modules within components.
Offers guidance on safely moving and stabilizing cluster racks due to weight and height.
Details safe procedures for removing and installing components within racks.
Highlights the importance of ergonomics and provides a link for safety and comfort information.
Explains HP's commitment to environmental safety and provides information on product recycling.
Lists and describes the standard HP components that comprise the Cluster Platform hardware.
Describes different HP Cluster Platform models like CPE, Dense, and Modular configurations.
Details the specifications and dimensions of HP 10000 Series racks used in cluster configurations.
Describes improvements and features of the HP Rack 10000 G2 Series for ease of maintenance.
Explains the HP Modular Cooling System (MCS) design for high-density server deployments.
Provides information on routing cables for rack-mount components in the HP 10000 Series 42U rack.
Introduces the HP ProCurve switches used for internal Ethernet networks in the cluster.
Details the features, ports, LEDs, and buttons of the ProCurve 2610 Series switches.
Describes the features, ports, LEDs, and buttons of the ProCurve 2650 and 2626 switches.
Highlights the characteristics and features of the HP ProCurve 2848 and 2824 switches.
Details the features and overview of the HP ProCurve 2848 Gigabit switch.
Explains the identification and meaning of LEDs and buttons on the ProCurve 2848 switch.
Provides an overview of the HP ProCurve 2824 Gigabit switch, including ports and features.
Describes KVM and console switch components used for managing cluster nodes.
Explains the power distribution units (PDUs) used in HP Cluster Platform and SVA configurations.
Lists the optional external SAN storage devices supported with HP Cluster Platform.
Details the procedures for cabling the TFT7600 rack-mount keyboard and monitor.
Explains how to connect KVM cables to the control node for cluster management.
Covers the setup for SVA console management using console switches and expansion modules.
Describes connecting storage controllers (MSA series) to the control node for administration.
Outlines the procedure for powering on HP Cluster Platform components and nodes.
Provides links to obtain the latest firmware updates for cluster components.
Offers fundamental tips for troubleshooting common Ethernet problems and connection issues.
Explains the function of LEDs on ProCurve switches to indicate status and potential issues.
Describes common problem conditions indicated by HP ProCurve switch LED patterns.
Provides links to specifications and installation guides for HP 10000 Series racks.
Links to specifications, guides, and overview for HP Modular Cooling Systems.
Provides links to specifications and documentation for ProCurve 2610 Series switches.
Offers links to specifications and documentation for ProCurve 2650 and 2626 switches.
Provides links to specifications and documentation for ProCurve 2848 and 2824 switches.
Links to specifications and guides for HP Modular Power Distribution Units (PDUs).
Provides links to specifications for monitored PDUs used with Scalable Visualization Arrays (SVA).
Links to specifications and guides for the TFT5600 rack-mount keyboard and monitor.
Provides links to specifications and guides for the TFT7600 rack-mount keyboard and monitor.
Offers links to specifications for the eight-port console switch used with SVA and SFS.
Lists essential guidelines to prevent electrostatic discharge and damage to components.
Describes various grounding methods for handling electrostatic-sensitive parts safely.
To Next Page
General