4. If the product is connected to the computer using a USB cable, or is connected via the network
without using a print server, select the Local printer attached to this computer option, and then
click the Next > button.
NOTE: If you select the Automatically detect and install my Plug and Play printer check box
prior to clicking the Next > button, the computer will automatically install the printer driver.
NOTE: If the product is connected via the network using a print server, select the A network
printer, or a printer attached to another computer option (Point and Print installation), and then
click the Next > button. For detailed installation instructions, see
Print sever connection
on page 99.
Figure 3-24 Local or Network Printer screen
5. If the printer port does not appear in the Use the following port drop-down list, select the Create
a new port option.
●
If the HP Standard TCP/IP Port option appears in the Type of port drop-down list, select this
option, and then click the Next button. The Welcome to the Add Standard TCP/IP Printer
Port Wizard dialog box appears.
●
If the HP Standard TCP/IP Port option does not appear in the Type of port drop-down list,
select the Standard TCP/IP Port option from the Type of port drop-down list, and then click
the Next button. The Welcome to the Add Standard TCP/IP Printer Port Wizard dialog box
appears.
NOTE: The HP Standard TCP/IP Port option provides additional network functionality and is the
recommended printer port for HP products.
NOTE: If the printer port already appears in the Use the following port drop-down list, see Use
an existing port for a direct connection on page 89. If the product is connected via the network
using a print server, see
Print sever connection on page 99.
ENWW Detailed Microsoft Windows installation instructions 97
Installing Windows
printing-system
com
To Next Page
Loading...
