3. Click the Next button on the Add Printer Wizard welcome dialog box.
4. If the product is connected via the network using a print server, select the A network printer, or
a printer attached to another computer option, and then click the Next > button.
NOTE: If the product is connected to the computer using a USB cable, or is connected via the
network without using a print server, select the Local printer attached to this computer option,
and then click the Next > button. You can also select the Automatically detect and install my
Plug and Play printer check box prior to clicking the Next > button to have the computer
automatically install the printer driver. For detailed installation instructions, see either
Use an
existing port for a direct connection on page 89 or see Create a new TCP/IP port for a direct
connection on page 96.
Figure 3-28 Add Printer Wizard — Local or Network Printer screen
100 Chapter 3 Install Windows printing-system components ENWW
To Next Page
Loading...
