Setting up the host computer running Windows 2000
1. Click the Start button, click the Settings option, and then click Printers option.
2. In the printer list, right-click the icon for the product you want to share, and then click the
Sharing option.
3. On the Sharing tab, click the Share As option, and then type a name for the product in the Share
Name text box. Click the OK button.
Setting up the host computer running Windows XP
1. On the Start menu, click one of the following options:
Printers and Faxes (Windows XP Professional)
-or-
Printers and Other Hardware Devices (Windows XP Home)
2. In the printer list, right-click the icon for the product you want to share, and then click the
Sharing option.
3. On the Sharing tab, click the Share this printer option, and then type a name for the product in
the Share Name text box. Click the OK button.
4. Click the Ports tab. Clear the Enable bidirectional support check box, and then click the OK
button.
Setting up client computers running Windows 2000
1. Click the Start menu, click the Settings option, and then click the Printers option.
2. Double-click the Add Printer icon to open the Add Printer Wizard.
3. Click the Next button to start the wizard.
4. Click the Network Printer option, and then click the Next button.
5. Type in the path and share name of the product to which you want to connect.
-or-
Click the Browse button and navigate to find the product to which you want to connect.
Click the Next button.
6. Select either the Yes or No option when asked if you want to use this product as your default printer
for Windows-based programs, and then click the Next button.
7. Click the Finish button to complete the installation and close the Add Printer Wizard.
NOTE: You might need to use the product software CD to complete the printer driver installations.
104 Chapter 3 Install Windows printing-system components ENWW
To Next Page
Loading...
