NOTE: If the product contains an HP Jetdirect EIO print server or an optional hard disk drive,
additional configuration pages print that provide information about those options.
b. Open a Web browser window.
c. In the address line of the browser, type ftp://<IPADDRESS>, where <IPADDRESS> is the
TCP/IP address of your product. For example, if the TCP/IP address is 192.168.0.10, type
ftp://192.168.0.10.
d. Press the Enter button.
Figure 3-48 Scan Setup Wizard — Contacting Device screen
122 Chapter 3 Install Windows printing-system components ENWW
To Next Page
Loading...
