●
Flip pages up
●
Booklet layout
●
Pages per sheet
●
Print page borders
●
Page order
Print on both sides
The default setting for the Print on both sides option is off (not selected). Print on both sides is
available when the following conditions exist:
●
Paper type on the Paper/Quality tab is set to any paper type except for the following types:
◦
Labels
◦
Color Laser Transparency
●
Paper sizes is set to any paper size except for the following sizes:
◦
Envelope #10
◦
Double Postcard (JIS)
◦
Envelope #9
◦
Envelope Monarch
◦
Envelope B5
◦
Envelope C5
◦
Envelope C6
◦
Envelope DL
Print on both sides (automatically)
The smart duplexing feature increases printing performance by preventing one-page print jobs or single-
sided pages of a duplexed print job from going through the duplexing unit even when the duplexing
feature has been selected in the driver.
All paper types support the smart duplexing feature, except for paper types that cannot be printed on
both sides (such as labels, transparencies, and envelopes) and the following paper types:
●
Prepunched
●
Preprinted
●
Letterhead
●
Cardstock
When the paper type is set to Unspecified, the smart duplexing feature is disabled.
To achieve the best print quality when printing on the second side of the page, the product needs to
make adjustments to its print modes. When you select a paper type, you are, in effect, instructing the
product to use a group of settings (such as fuser temperature and print speed) to print the paper with
ENWW Finishing tab features 171
HP PCL 6 Print Driver for
Windows
To Next Page
Loading...
