Job Storage Mode
Use the Job Storage Mode options on the HP Color LaserJet CM6030 and CM6040 MFP Series
product to store documents at the product and then control their printing at the product control panel.
The HP Color LaserJet CM6030 and CM6040 MFP Series product offers the following Job Storage
Mode options:
●
Off
●
Proof and Hold
●
Personal Job
●
Quick Copy
●
Stored Job
These options and the settings that control them are described below.
Off
When selected, this option turns the job-storage feature off (it is disabled), which means that the print
job will not be stored in the product.
Proof and Hold
To use the Proof and Hold option, the job-storage feature must be enabled.
When selected, this option stores the print job in memory and prints only the first copy of the job, allowing
you to check the first copy. If the document prints correctly, you can print the remaining copies of the
print job at the control panel. You can set the number of proof-and-hold print jobs that can be stored in
the product at the control panel.
After it is released for printing, the proof-and-hold job is immediately deleted from the product. If more
copies are needed, you must reprint the job from the software program. If you send a second proof-and-
hold job to the product with the same user name and job name as an existing proof-and-hold job (and
you have not released the original job for printing), the job will overwrite the existing job. Proof-and-hold
jobs are deleted if you turn off the product.
NOTE: The product configuration can be set to hold a maximum of 50 quick-copy or proof-and-hold
jobs. The number is set at the product control panel in the CONFIGURATION menu, and the default is
32. When this preset limit is reached, the new document overwrites the oldest held document. Also, a
document that has the same user name and job name as one that is already stored on the printer hard
disk will overwrite the existing document.
Personal Job
To use the Personal Job option, the job-storage feature must be enabled.
When you select Personal Job, the print job is sent to the product but is not printed until you request
the job at the product control panel. Selecting Personal Job activates the PIN group box. If PIN to
print is selected, the print job can be printed only after you type the correct PIN at the control panel.
After the job is printed, the job is immediately deleted from the product. This feature is useful when you
are printing sensitive or confidential documents that you do not want to leave in an output bin after
printing.
ENWW Job Storage tab features 181
HP PCL 6 Print Driver for
Windows
To Next Page
Loading...
