Deleting a job-storage print job
Sometimes it is necessary to delete a print job from the product memory. Do this from the product control
panel.
1. Touch Job Storage.
2. Touch the appropriate folder on the left of the screen.
3. Touch the appropriate document.
If a PIN is set for the stored job, type the correct PIN. Once the PIN is confirmed, the job is unlocked.
4. Touch Delete.
5. A message appears: Do you want to delete this stored job?
Touch Yes. The document is deleted.
Or, do the following:
1. Touch Job Storage.
2. Touch the appropriate folder on the left of the screen.
3. Touch appropriate document.
4. Touch Delete.
If a PIN is set for the stored job, type the correct PIN. Once the PIN is confirmed, the job is deleted.
E-mail Alerts
NOTE: The E-mail Alerts screen is available if the product is installed over a network connection. It
is not available when the product is installed over a USB connection.
Choose E-mail Alerts to configure the product to send e-mail notifications to users.
If a user name and password have been set, you might need to obtain them from the IT administrator.
For a complete explanation of the features and functionality of the embedded Web server, see the HP
Color LaserJet CM6030 and CM6040 MFP Embedded Web Server User Guides, which are available
on the Admin CD.
250 Chapter 5 Macintosh software and utilities ENWW
To Next Page
Loading...
