Choose one of the following options in the Configuration drop-down menu:
●
DHCP
●
BootP
●
Manual
You can also use this screen to modify the following settings:
●
Host Name
●
IP Address
●
Subnet Mask
●
Default Gateway
To save new settings, click Apply Now.
To view and change other network settings, click Additional Network Settings. The HP EWS
Networking screen opens.
If a user name and password have been set, you might need to obtain them from your IT administrator.
For a complete explanation of the features and functionality of the embedded Web server, see the HP
Color LaserJet CM6030 and CM6040 MFP Embedded Web Server User Guides, which are available
on the Admin CD.
The HP EWS opens to the Network Settings screen. For information about this screen, see the HP
Color LaserJet CM6030 and CM6040 MFP Embedded Web Server User Guides, which are available
on the Admin CD.
Bonjour Settings
NOTE: The Bonjour Settings screen is available if the product is installed over a network connection.
It is not available when the product is installed over a USB connection.
Choose Bonjour Settings to open the Bonjour Settings screen. Bonjour is enabled by default.
252 Chapter 5 Macintosh software and utilities ENWW
To Next Page
Loading...
