Macintosh system requirements
The HP printing-system software has the following minimum system requirements for the Macintosh OS
X V10.2.8, V10.3, V10.4, and later operating systems:
●
CD-ROM
●
128 MB RAM
●
160 MB of free hard disk space
NOTE: For Mac OS V10.4 and later, PPC and Intel Core Processor Macs are supported.
Printer driver
Printer drivers provide access to product features, such as printing on custom-sized paper, resizing
documents, and inserting watermarks.
NOTE: The most recent drivers are available at www.hp.com/support/cljcm6030mfp or at
www.hp.com/support/cljcm6040mfp.
Select the correct printer driver for Windows
Printer drivers provide access to the product features and allow the computer to communicate with the
product (using a printer language). Check the installation notes and readme files on the product CD for
additional software and languages.
HP PCL 6 driver description
●
Recommended for printing in all Windows environments
●
Provides the overall best speed, print quality, and product-feature support for most users
●
Developed to align with the Windows Graphic Device Interface (GDI) for the best speed in Windows
environments
●
Might not be fully compatible with third-party and custom software programs that are based on
PCL 5
HP postscript level 3 emulation universal printer driver description
●
Recommended for printing with Adobe
®
software programs or with other highly graphics-intensive
software programs
●
Provides support for printing from postscript level 3 emulation needs or for postscript flash font
support
●
Performs slightly faster than the PCL 6 driver when using Adobe software programs
HP PCL 5 Universal Print Driver description
●
Recommended for general office printing in Windows environments
●
Compatible with previous PCL versions and older HP LaserJet products
●
The best choice for printing from third-party or custom software programs
ENWW Windows printing-system software 39
Software description