●
Paper Source: The options are Printer Auto Select, Manual Feed (Tray 1), Tray 1, Tray 2, or
Tray 3. <Lock>
●
Stapling/Folding: The options are either None, One Staple Left, One Staple Right, Two Staples
Left, Two Staples Right, and Two Staples Top.
●
Output Bin: The option is Auto Select. <Lock>
●
Job Retention Mode: The options are Off:, Proof & Hold, Private Job, Quick Copy, or Stored
Job. <Lock>
Advanced Features The following advanced features are also available:
●
Pages per Sheet: The options are 1, 2, 4, 6, 9, or 16 .
●
Booklet Printing: The options are Off, Left Edge Binding, or Right Edge Binding.
●
Booklet Target Size: The option is None.
●
Send True Type As Bitmap: The options are True or False.
●
Print all Text as Black: The options are True or False.
●
Print Document On: The options are True or
False.
●
Rotate by 180 degrees: The options are Enable or Disable.
●
Scale to Fit:. The options are True or False.
●
Percent of Normal Size: The options are Enter % or 25-400.
●
Watermarks: The options are None, Confidential, Draft, or Sample.
●
Copies: The options are 1 or (Enter Number).
●
PostScript Language Level: The options are 1, 2 or 3.
●
Mirror Output:. The options are True or False.
Device Settings tab
●
Tray 3: The options are Installed or Not Installed .
●
Tray 4: The options are Installed or Not Installed .
●
Tray 5: The options are Installed or Not Installed .
●
Printer Alert Notification Settings: The options are Show for Every Print Job, Show for Device
Errors and Warnings, Show for Device Errors, or Disabled.
This advanced feature also contains the following sub-features:
◦
Device Query Interval: The options are Normal or Minimize Network Traffic.
◦
Access HP Online Product Support:
The options, available through drop-down menu, are
Enabled or Disabled.
◦
Shop for Supplies: The options are Enabled or Disabled.
●
Allow Manual Duplexing: The options are Enabled or Disabled.
52 Chapter 2 Software description ENWW
To Next Page
Loading...
