NOTE: If the installation failed, reinstall the software.
NOTE: If the New Hardware Found message appears, insert the CD, follow the
onscreen instructions, and accept the default selections.
To connect to a Macintosh computer
NOTE: The HP Color LaserJet CP3505 supports Macintosh OS X V10.28, V10.3, V10.4 or
later. For Macintosh OS X V10.4, PPC and Intel core processor Macintosh are supported.
1. Connect a USB cable between the printer and the computer.
NOTE: HP does not recommend using USB hubs. Use a USB cable that is no longer
than 2 meters (6.5 feet).
2. Place the CD in the CD-ROM drive. For OS V9.1 to V9.2.x, go to step 3. For OS X, go to step 7.
3. Run the Installer and complete a custom install. Select all options, including USB Components
(Classic). When prompted, restart the computer.
4. Run the Apple Desktop Printer Utility from HD/Applications/Utilities. Double-click HP Printer
(USB), and then click OK. Next to the USB Printer Selection, click Change.
5. Select the printer, and then click OK. Next to Postscript Printer Description (PPD) File, click
Auto Setup, and then click Create. Save the printer setup.
6. On the desktop, highlight the printer. Click the Printing menu, and then click Set Default
Printer. Go to step 10.
7. Run the Installer and complete an easy install.
NOTE: If OS X and OS V9.1 (Classic) to V9.2.x (Classic) are installed on the same
computer, the installer shows both the Classic and the OS X installation options.
8. From HD/Applications/Utilities/Print Center, start the Print Center. If the printer appears in the
Printer List, delete the printer. Click Add. On the next page, click the drop-down menu, and
then select USB.
9. From the Printer Model drop-down list, select HP. Under Model Name, select the printer, and
then click Add.
10. Test the software installation. Print a page from any program to make sure that the software is
correctly installed.
NOTE: If the installation failed, reinstall the software.
ENWW Connecting to a network or a computer 25
To Next Page
Loading...