66 Installation and configuration C7085-90921
Connecting to a 10Base-T or 10/100Base-TX
network
Plug the connector of your unshielded twisted-pair cable into the
RJ-45 port. The other end of the cable should be attached to the
network.
Note
The HP JetDirect print server supports one Ethernet cable connection
at a time.
Plug the connector of your unshielded twisted-pair cable into the
RJ-45 port. The other end of the cable should be attached to the
network.
Note
The HP JetDirect Print server supports RJ-45 connection to 10Base-T
or 10/100Base-TX and Fast Infrared (FIR) and parallel ports.
HP Color LaserJet 4500 RJ-45 (10Base-
T or 10/100Base-TX) connection
HP Color LaserJet 4550 RJ-45 (10Base-
T or 10/100Base-TX) connection
To Next Page
Loading...