HP Color LaserJet 4600 - Page 26

24 Site requirements C9660-90901
Electrical specifications
Table 1-3 lists the electrical specifications required to run the printer safely.
* When the printer is in standby mode, it continues to consume a minimal amount of energy.
Note This information is preliminary and might not be current. Please see http://www.hp.com/support/
lj4600 for current information.
Environmental specifications
Keep the printer within the environmental conditions shown in Table 1-4 for optimum performance.
Table 1-3 Electrical specifications
Item 110-volt models 220-volt models
Power requirements 100-127 V (-10%, +6%)
50/60 Hz (+/- 2 Hz)
220-240 V (-10%, +6%)
50/60 Hz (+/- 2 Hz)
Power consumption
(LaserJet 4600)
During printing
During standby
*
During PowerSave
Off
426 W
34 W
30 W
0 W
430 W
36 W
32 W
0 W
Minimum recommended
circuit capacity for typical
product
6 A 3 A
Table 1-4 Environmental specifications
Item Operating
Temperature
Recommended
Allowed
17° to 25° C (63° to 77° F)
10° to 30° C (50° to 86° F)
Humidity
Recommended
Allowed
30% to 70% RH
10% to 80% RH
Altitude
Allowed 0 to 2600 m
(0 to 8530 ft)