Printer control panel problems
The following table lists common printer control panel problems and suggested solutions
for resolving them.
Printer control panel problems
Issue Cause Solution
The printer control panel display
is blank or is not lit, even when
the fan is running.
Fans may run while t he printer
is in Standby mode (off). Press
the printer’s on/off button to turn
the printer on.
Printer sett
ings in the printing
software application or printer
driver differ from the printer
control pane
l settings.
Confirm that
the settings in
the application and printer
driver are appropriate. The
application
settings override the
printer driver and control panel
settings, and the printer driver
settings ov
erride the control
panel settings.
Control panel settings were not
correctly saved after they were
changed.
Reselect the control panel
settings, and then press
.An
asterisk (*) should appear to the
rightofthesetting.
The Data indicator light is lit,
and there are no pages printing.
Buffered data exists in the
printer. Press to print the
buffered data using current
control panel setti ngs and
activate the new control panel
settings.
Control pan el settings work
incorrectly
If the printer is on a network,
another user may have changed
printer control panel settings.
Consult the network
administrator to coordinate
changes to printer control panel
settings.
Tray 3 o
r Tray 4 (500-sheet
paper feeder) does not appear
as an inpu t tray option on the
config
urationpageoronthe
control panel.
Tray 3 o
rTray4appearsas
an option only i f it is installed.
Verify correct installation of
Tray 3 o
rTray4.
Unable
to select Tray 3 o r Tray 4
(optional 500-sheet paper
feeder)
Tray 3 or Tray 4 does not appear
as an option in the printer driver.
Verify that the printer driver
configuration recognizes Tray 3
or Tray 4.
171 Chapter 8 Problemsolving EN_WW
To Next Page
Loading...
