Print media specifications
For optimum results, use conventional 75 g/m
2
to 90 g/m
2
(20 to 24 lb) photocopy paper.
Verify that the paper is of good quality and is free of cuts, nicks, tears, spots, loose particles,
dust, wrinkles, curls, or bent edges.
Supported paper weights and sizes
Normal orientation loads long-side first into the printer. This is the preferred o rientation
because it allows for longer consumable life and increased printer speed. However, some
paper sizes can be loaded short-side first. This orientation is called rotated. Paper that can
be fed into the printer using the rotated, short-side first orientation have “-R” after the paper
size. These paper sizes are Letter-R, A4-R, A5-R, and B5-R.
Tray 1 paper sizes
Tray 1 Dimensions Weight or thickness Capacity
Standard size
paper/cardstock
(Letter/A4, Legal,
Executive, JIS B5,
B5-R, A5, A5-R, 11 by
17
1
,A3
60 to 200 g/m
2
(16to53lbbond)
100 s heets
(75 g/m
2
;20lbbond)
Minimum size
paper/cardstock
76 by 127 mm
(3 by 5 in)
60 to 200 g/m
2
(16to53lbbond)
100 s heets
(75 g/m
2
;20lbbond)
Maximum siz
e
paper/cardstock
312 by 470 mm
(12.3 by 18.5 in)
60 to 200 g/m
2
(16to53lbbond)
100 s heets
(75 g/m
2
;20lbbond)
Standard size glossy
paper (Lett
er/A4,
Letter-R, A4-R, Legal,
Executive, JIS B5,
B5-R, A5, A
5R, 11 by
17, A3)
75 to 163 g/m
2
(20to43lbbond)
Maximum stack height:
10 mm (0.4 in)
Minimum size glossy
paper
76 by 127 mm
(3 by 5 in)
75 to 163 g/
m
2
(20to43lb
bond)
Maximum st
ack height:
10 mm (0.4 i
n)
Maximum size glossy
paper
312 by 470 mm
(12.3 by 18.5 in)
75 to 163 g/m
2
(20to47lbbond)
Maximum stack height:
10 mm (0.4 in)
Standard size
transparencies
(Letter/A4, Letter-R,
A4-R, Legal, Executive,
JIS B5, B5-R, A5, A5-R,
11 by 17, A3)
0.12 to 0.13 mm thick
(4.7 to 5.5 mils thick)
60 sheets
Minimum size
transparencies
76 by 127 mm
(3 by 5 in)
60 to 200 g/m
2
(16to53lbbond)
100 s heets
(75 g/m
2
;20lbbond)
Maximum size
transparencies
312 by 470 mm
(12.3 by 18.5 in)
60 to 200 g/m
2
(16to53lbbond)
100 s heets
(75 g/m
2
;20lbbond)
EN_WW Print m ed ia specifications 16