Control panel menus
You can perform most routine printing tasks from the computer through the printer driver or
software application. This is the most convenient way to control the printer, and will override
the printer control panel settings. See the help files associated with the software, or for more
information on accessing the printer driver, see P
rinter software.
You can also control the printer by changing settings in the printer control panel. Use the
control panel to access printer features not supported by the printer driver or software
application. Use the control panel to configure trays for paper size and type.
Getting started basics
•
Enter the menus and activate any selection by pressing the Select button ( ).
•
Use the Up or Down arrows to navigate through the menus. In addition to menu
navigation, the Up and Down arrows (
) can increase and decrease numerical value
selections. Hold down the Up or Down arrows to scroll faster.
•
TheBackbutton( ) allows you to move bac k in menu selections as w ell as select
numerical v alues when configuring the printer.
•
Exit all menus by pressing PAUSE/RESUME.
•
If no key is pressed for 30 seconds, the printer will re turn to th e Ready state.
•
A lock symbol next to a m enu item means a PIN number is needed to use that item.
Typically, this number is obtained from your network administrator.
25 Chapter 2 Control panel EN_WW
To Next Page
Loading...
