External panels, covers, and doors
Front door and front-lower cover
1. Open the front door and pull out the print-cartridge drawer.
Figure 6-22 Remove the front door and front-lower cover (1 of 13)
2. Use a small flatblade screw driver to release one tab (callout 1) on the cartridge-drawer stop.
TIP: This clip slightly extends under the edge of the top cover. In the next step, you must push
in on the edge of the top cover to allow the clip to rotate away from the chassis
Figure 6-23 Remove the front door and front-lower cover (2 of 13)
1
ENWW External panels, covers, and doors 125
To Next Page
Loading...