5. Pull the print-cartridge drawer out of the product to remove it.
Figure 6-26 Remove the front door and front-lower cover (5 of 13)
6. Remove the paper tray (if installed), and then carefully place the product front-side up
CAUTION: The ADF and scanner cover are not captive and can open suddenly if the product is
placed front-side up. Always support the ADF and scanner cover before placing the product front-
side up.
7. Release three tabs (callout 3) and then push the guide (callout 4) into the product (away from the
tray 1 cavity).
Figure 6-27 Remove the front door and front-lower cover (6 of 13)
3
4
ENWW External panels, covers, and doors 127
To Next Page
Loading...