HP Color LaserJet CP1210 Series; Color LaserJet CP1510 Series - Problem-Solve Diagrams

5. Disconnect two wire-harness connectors (callout 7; J102 and J103).
Figure 6-73 Remove the power supply (low-voltage; 4 of 10)
7
6. HP Color LaserJet CP1510 Series Printer only: Disconnect one connector (callout 8; P4), and
then remove four screws (callout 9) to release the formatter PCA from the chassis.
NOTE: You do not need to remove the PCA. Instead, release it from the chassis so it can be
moved out of the way.
TIP: When you reinstall the formatter PCA, make sure that all of the connectors on the PCA are
fully seated.
Figure 6-74 Remove the power supply (low-voltage; 5 of 10)
9
8
142 Chapter 6 Removal and replacement ENWW