HP Color LaserJet CP2020 Series - Page 172

5. Disconnect two connectors (callout 7), and then release the wire harnesses from the retainer
(callout 8).
Figure 6-113 Remove the power-supply sub PCA (4 of 6)
8
7
6. Release one tab (callout 9), and one pin (callout 10) to release the retainer and PCA assembly
(callout 11).
Figure 6-114 Remove the power-supply sub PCA (5 of 6)
11
9
10
152 Chapter 6 Removal and replacement ENWW