General topic Questions
Condensation
●
Does condensation occur following a temperature change (particularly in winter
following cold storage)? If so, wipe affected parts dry or leave the product on
for 10 to 20 minutes.
●
Was a print cartridge opened soon after being moved from a cold to a warm
room? If so, allow the print cartridge to sit at room temperature for 1 to 2 hours.
Miscellaneous
●
Check for and remove any non-HP components (for example, print cartridges
or memory modules) from the product.
●
Check to see whether the hardware or software configuration has changed or
the problem is not associated with any specific software.
●
Remove the product from the network and ensure that the failure is associated
with the product before beginning troubleshooting.
●
For any print-quality issues, calibrate the product. See
Calibrate the product
on page 185
ENWW Troubleshooting process 183
To Next Page
Loading...