Embedded Web server sections
The table below describes the basic screens of the embedded Web server.
Tab or section Description
Status tab
Provides product, status, and
configuration information.
●
Device Status: Shows the product status and shows the life remaining of
HP supplies, with 0% indicating that a supply is empty.
●
Supplies Status: Shows the approximate life remaining of HP supplies, with 0
percent indicating that a supply is empty. This page also provides supplies part
numbers.
●
Device Configuration: Shows the information found on the product Configuration
page.
●
Network Summary: Shows the information found on the product Network
Configuration page.
●
Print Info Pages: Allows you to print the PCL, PCL6, PS Font Lists, and the supplies
status page that the product generates.
●
Color Usage Job Log: Shows user color print jobs on a job-by-job basis.
●
Event Log: Shows a list of all product events and errors.
●
Support button: Provides a link to the product support page. The Support button
can be password-protected; see
Set password on page 34
●
Shop for Supplies button: Provides a link to a page where you can order supplies
for the product. The Shop for Supplies button can be password-protected; see
Set
password on page 34
Settings tab
Provides the ability to configure the
product from your computer.
●
Device Information: Allows you to name the product and assign an asset number
to it. Also type the name for the primary contact who will receive information about
the product.
●
Paper Handling: Allows you to change the paper-handling defaults for the product.
●
Printing: Allows you to change the printing defaults for the product.
●
PCL 5c: Allows you to change the PCL 5c defaults for the product.
●
PostScript: Allows you to change the PostScript defaults for the product.
●
Print Quality: Allows you to change the print quality defaults for the product,
including calibration settings.
●
Print Density: Allows you to change the contrasts, highlights, midtones, and
shadows values for each supply.
●
Paper Types: Allows you to configure print modes that correspond to the media
types that the product accepts.
●
System Setup: Allows you to change the system defaults for the product.
●
Service: Allows you to start the cleaning procedure on the product.
●
Support button: Provides a link to the product support page. The Support button
can be password-protected.
●
Shop for Supplies button: Provides a link to a page where you can order supplies
for the product. The Shop for Supplies button can be password-protected.
ENWW Embedded Web server 41
To Next Page
Loading...