b. Connect the product to the computer when prompted at the Connect your Product
now screen.
c. Click the Next button.
●
For wired network connected products, follow these steps:
a. Select the Connect through a wired network option.
Figure 3-2 Software installation — Connection Type screen for network connected
installation
b. If the product's network settings are not known, select the Automatically find my
product on the network option.
c. If the product's networking settings are known, enter either the product's host name, IP
address, or hardware address.
24 Chapter 3 Install Windows software and utilities ENWW
To Next Page
Loading...
