HP Color LaserJet Enterprise CM4540 MFP Series - Page 246

Receive fax settings
Fax receive setup
Set the ringer volume
1. From the Home screen, scroll to and touch the Administration button.
2. Open the following menus:
●
Fax Settings
●
Fax Receive Settings
●
Fax Receive Setup
3. Touch the Ringer Volume drop down menu and then select one of the following ringer volume
settings:
●
Off
●
Low (default)
●
High
4. Touch the Save button to save the ringer volume setting.
Set rings-to-answer
The rings-to-answer setting determines the number of times the phone rings before the call is answered
by the fax accessory.
NOTE: The default setting range for rings-to-answer is country/region-specific. The range of possible
rings-to-answer is limited by country/region.
1. From the Home screen, scroll to and touch the Administration button.
2. Open the following menus:
●
Fax Settings
●
Fax Receive Settings
●
Fax Receive Setup
3. Touch the Rings To Answer drop-down menu and then touch the number of rings (1–5, the default
is 1).
4. Touch the Save button.
226 Chapter 12 Fax ENWW