Table 2-10 Manage Supplies menu (continued)
First level Second level Third level Fourth level Values
Low Threshold Settings 1-100%
Default = 10%
Toner Collection Unit Very Low Settings Stop*
Prompt to continue
Continue
Color/Black Mix Auto*
Mostly Color Pages
Mostly Black Pages
Supply Messages Low Message On*
Off
Reset Supplies New Document Feeder Kit No
Yes
Manage Trays menu
To display: At the product control panel, select the Administration menu, and then select the Manage
Trays menu.
In the following table, asterisks (*) indicate the factory default setting.
Table 2-11 Manage Trays menu
First level Values
Use Requested Tray Exclusively*
First
Manually Feed Prompt Always*
Unless loaded
Size/Type Prompt Display*
Do not display
Use Another Tray Enabled*
Disabled
Alternative Letterhead Mode Disabled*
Enabled
Blank Pages Auto *
Yes
38 Chapter 2 Control panel menus ENWW
To Next Page
Loading...
