4. If paper is jammed as it enters the output bin,
remove the fuser and gently pull the paper
downward to remove it.
5. Paper could be jammed inside the fuser where
it would not be visible. Remove the fuser to
check for jammed paper inside.
CAUTION: The fuser can be hot while the
product is in use. Wait for the fuser to cool
before handling it.
6. Grasp the fuser handles, lift up slightly, and pull
straight out to remove the fuser.
7. Open the jam-access door. If paper is jammed
inside the fuser, gently pull it straight up to
remove it. If the paper tears, remove all paper
fragments.
CAUTION: Even if the body of the fuser has
cooled, the rollers that are inside could still be
hot. Do not touch the fuser rollers until they
have cooled.
© 2009 Copyright Hewlett-Packard Development
Company, L.P.
2 www.hp.com/support/cljcp4025
www.hp.com/support/cljcp4525
To Next Page
Loading...