●
Paddle motor: The output bin 3 upper delivery roller sensor is not sensed for a specified period of time
after the paddle motor is rotated. The alignment roller sensor is not sensed for a specified period of
time after the paddle motor is reversed.
●
Stapler/stacker lifter motor: The output bin 3 higher limit sensor or output bin 3 media full sensor is
not sensed for a specified period of time after the stapler/stacker lifter motor is rotated. The output bin
3 higher limit sensor, output bin 3 lower limit sensor, or output bin 3 media full sensor is not sensed for
a specified period from when the stapler/stacker lifter motor is reversed.
Delivery operation
The stapling mailbox has two modes.
●
Stacker mode: The printed page is delivered to output bin 3 first and then delivered to the subsequent
output bins.
●
Mailbox/job separator mode: The printed page is delivered to the specified output bin for each print
job.
Figure 1-64 Stapling mailbox delivery operation
SL3
SL2
SL1
SR2
SR1
SR5
SW1
M5
M6
M3
M4
SR4
PS2502
PS2503
PS2504
PS2501
SR3
PS2601
PS2602
SR7
SR6
Output bin 1
Output bin 2
Output bin 3
Table 1-35 Delivery components (stapling mailbox)
Component Abbreviation Component Name
M1 Stapler motor
M3 Jogger motor
M4 Paddle motor
M5 Stapler/stacker feed motor
M6 Stapler/stacker lifter motor
88 Chapter 1 Theory of operation ENWW
To Next Page
Loading...