Recommended action
No action necessary.
Reattach output bin
Description
This message displays when the standard output bin is detached at power-up or optional output bin (stapler/
stacker) and does not have the Jetlink cable attached at power-up.
Recommended action
Touch the Hide button to remove this message.
Receiving Upgrade
Description
The product is receiving a firmware upgrade.
Recommended action
Do not turn the product off until it reaches the Ready state.
Remove all print cartridges
Description
The product is testing the transfer unit assembly.
Recommended action
To perform the test, remove all the print cartridges.
To cancel, press the Stop button.
Remove at least one print cartridge
Description
The product is testing the print-cartridge motor.
Recommended action
To perform the test, remove the print cartridge from the product.
To cancel, press the Stop button.
Remove shipping sheet
Description
The product displays this message if the user attempts to use the product without removing the transfer unit
shipping sheet.
ENWW Tools for troubleshooting 413
To Next Page
Loading...