Recommended action
1. Open the front door.
2. Remove the shipping sheet.
3. Close the front door.
Remove USB accessory
Description
This message displays when an unsupported USB device is inserted into a host USB port on the product.
Recommended action
Remove the unsupported USB device.
Replace <Supply>
Description
This alert displays only if the product is configured to stop when a supply reaches the very low threshold. The
product indicates when a supply level is at its estimated end of life. The actual life remaining might be
different than estimated.
The supply does not need to be replaced now unless the print quality is no longer acceptable. HP
recommends that the customer have a replacement supply available to install when print quality is no longer
acceptable.
The product can be configured to stop when the supply level is very low. The supply might still be able to
produce acceptable print quality.
When an HP supply has reached its approximated end of life, the HP Premium Protection Warranty on that
supply ends.
●
10.00.70 : (event code) Black toner cartridge
10.01.70 : (event code) Cyan toner cartridge
10.02.70 : (event code) Magenta toner cartridge
10.03.70 : (event code) Yellow toner cartridge
Recommended action
Replace the specified supply.
Or, configure the product to continue printing using the Manage Supplies menu on the product control panel.
Replace DIMM <MEM Test Failure>
Description
The listed DIMM is not functioning properly and must be replaced.
Recommended action
Replace the DIMM.
414 Chapter 2 Solve problems ENWW
To Next Page
Loading...