Recommended action
Contact the network administrator.
Size mismatch in Tray <X>
Description
The paper in the listed tray does not match the size specified for that tray.
Recommended action
1. Load the correct paper.
2. Make sure that the paper is positioned correctly.
3. Close the tray, and then make sure that the control panel lists the correct size and type for the specified
tray.
4. If necessary, use the control panel menus to reconfigure the size and type settings for the specified
tray.
5. If error persists, use the Tray/Bin manual sensor test to test the switch.
Sleep mode on
Description
The product is in sleep mode. Pressing a control panel button, receiving of a print job, or an error condition
clears this message.
Recommended action
No action necessary.
Staple Cartridge <X> low (warning)
Description
The specified staple cartridge is at end of life.
After an HP supply has reached the very low threshold, the HP premium protection warranty ends.
Recommended action
Replace the staple cartridge.
Staple Cartridge low
Description
The product indicates when a supply level is low. 20 to 50 staples remain in the cartridge.
Recommended action
Replace the staple cartridge.
420 Chapter 2 Solve problems ENWW
To Next Page
Loading...