Recommended action
Replace the ITB kit
Tray <X> [type] [size]
Description
The paper in the specified tray is detected as the specified size and type.
The custom switch was not changed.
Recommended action
If the paper is a custom size or type, change the custom-size switch on the tray as necessary.
Tray <X> empty: [Type], [Size]
Description
The specified tray is empty and the current job does not need this tray to print.
●
X = 1: Tray 1
●
X = 2: Tray 2
●
X = 3: Tray 3
●
X = 4: Tray 4
●
X = 5: Tray 5
Recommended action
Refill the tray at a convenient time.
This could be a false message. If the tray is loaded without removing the shipping lock, the product does not
sense that the paper is loaded. Remove the shipping lock, and then load the tray.
Tray <X> lifting
Description
The product is in the process of lifting paper in the indicated tray.
●
X = 2: Tray 2
●
X = 3: Tray 3
●
X = 4: Tray 4
●
X = 5: Tray 5
Recommended action
No action necessary.
ENWW Tools for troubleshooting 423
To Next Page
Loading...