HP Color LaserJet Pro M452dn User Manual (English)

To Next Page

Dansk ............. 15

Català ............. 13

Español ........... 11

Italiano ............. 9

Deutsch ............. 6

Français ............ 3

English .............. 1

Nederlands ...... 17

Norsk .............. 21

Suomi ............. 19

Svenska .......... 25

Português ....... 23

Windows

1. Do not connect the USB cable before installing the software. If

the cable is already connected, disconnect it before continuing.

The installation process prompts to connect the cable at the

appropriate time.

2. Continue with “5. Locate or download the software installation les”

NOTE: During software installation, select the option to Directly

connect this computer using a USB cable. (Windows only)

Mac

1. For Mac, connect the USB cable between the computer and the

printer before installing the software.

2. Continue with “5. Locate or download the software installation les”

Wired (Ethernet) network connection

Use a standard network cable. (Cable not included.)

1. Connect the network cable to the printer and to the network.

Waita few minutes for the printer to acquire a network address.

2. On the control panel, view the display while it is in the Ready

state. If an IP address is listed, the network connection has been

established. If not, wait a few more minutes and try again. Note

the IP address for use during software installation. Example IP

address: 192.168.0.1

To manually congure the IP address, see “Manually congure the

IP address”.

3. Continue with “5. Locate or download the software installation les”

NOTE: During software installation, select the option to Connect

through a network. (Windows only)

Color LaserJet Pro

M452nw, M452dn

Getting Started Guide

IMPORTANT:

Follow Steps 1 - 2 on the

printer hardware setup

poster, and then continue

with Step 3.

After turning on the printer, wait for it to initialize. To navigate the control panel, use the arrow

buttons and the OK button. Follow the prompts on the control panel to congure these settings:

• Language

• Location

• Default Settings

Under Default Settings select one of these options:

• Self-managed: Optimized default settings for most users that include guided setup

and conguration steps and automatic updates.

• IT-managed: Optimized default settings for eet manageability.

Settings are fully customizable after initial setup.

NOTE: Select Print Information Page to print a page that instructs how to change the

default settings.

www.hp.com/support/colorljM452 www.register.hp.com

USB connection directly between the

printer and the computer

Use an A-to-B type USB cable (not included with all models).

Manually congure the IP address

See the printer user guide for information on how to manually congure

the IP address. See the “Troubleshooting” section of this guide.

Initial setup on the control panel

Select a connection method and prepare for software installation

Built-in wireless network connection (nw models)

Method 1

The recommended method for connecting the M452nw to a wireless network

is during the printer software installation process, as described in “5. Locate or

download the software installation les”.

Method 2 (push-button routers only)

Another method for connecting the printer to a wireless network is the push-

button method, described in the steps below.

1. Press the Wireless button.

2. Open the Wireless On/O menu.

3. Select On.

4. Return to the Wireless Menu and select Wi-Fi Protected Setup.

5. Select Pushbutton.

6. Within 2 minutes of selecting Pushbutton, at the wireless router or

access point, press the device discovery button to discover the printer.

7. Wait while the printer establishes a network connection.

8. View the control-panel display after it has returned to the Ready state. If

an IP address is listed, the network connection has been established. If

not, wait a few more minutes and try again. Notethe IP address for use

during software installation. Example IP address: 192.168.0.1

9. To print from a computer, continue with “5. Locate or download the

software installation les”. To print from a phone or tablet only, continue

with “7. Mobile and wireless printing”.

Need help?

Do you have a question about the HP Color LaserJet Pro M452dn and is the answer not in the manual?

HP Color LaserJet Pro M452dn Specifications

General

Print technology	Laser
Maximum resolution	600 x 600 DPI
Duplex printing mode	Auto
Time to first page (black, normal)	9 s
Time to first page (color, normal)	9.9 s
Print speed (black, normal quality, A4/US Letter)	27 ppm
HP segment	Business
Printer fonts	Scalable, TrueType
Printing colors	Black, Cyan, Magenta, Yellow
Country of origin	Vietnam, Japan
Maximum duty cycle	50000 pages per month
Recommended duty cycle	750 - 4000 pages per month
Number of print cartridges	4
Page description languages	PCL 5c, PCL 6, PostScript 3, URF, PWG, PCLmS, PDF
Display	LCD
Control type	Buttons
Certification	CISPR 22:2008 (Class B), EN 55022:2010 (Class B), FCC CFR 47, Part 15 (Class B), ICES-003, Issue 5 (Class B), EN 61000-3-2:2006 +A1:2009 +A2:2009, EN 61000-3-3:2008, EN 55024:2010, Other EMC approvals as required by individual countries
Product color	White
Display number of lines	2 lines
AC input voltage	220 - 240 V
AC input frequency	50/60 Hz
Power consumption (off)	0.05 W
Power consumption (standby)	17.6 W
Power consumption (printing)	570 W
Power consumption (PowerSave)	0.6 W
Energy Star Typical Electricity Consumption (TEC)	1.294 kWh/week
Sustainability certificates	EPEAT Silver, ENERGY STAR
Total input capacity	300 sheets
Total output capacity	150 sheets
Maximum input capacity	850 sheets
Paper tray 1 input capacity	50 sheets
Paper tray 2 input capacity	250 sheets
Total number of input trays	2
Maximum number of input trays	3
Sound power level (standby)	4.8 dB
Sound power level (printing)	6.3 dB
Sound pressure level (printing)	49 dB
Envelopes sizes	B5, C5, DL
Photo paper sizes	10x15 cm
Custom media width	76 - 216 mm
Custom media length	127 - 356 mm
Paper tray media types	Bond paper, Photo paper, Postcard, Letterhead, Rough paper, Labels, Glossy paper, Plain paper, Recycled paper, Envelopes
Paper tray media weight	60 - 200 g/m²
Non-ISO print media sizes	Oficio (media size), 16K
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
ISO C-series sizes (C0...C9)	C5
JIS B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Wi-Fi	No
Cabling technology	10/100/1000Base-T(X)
Security algorithms	SNMPv2, HTTPS, SSL/TLS, SNMPv3
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Mobile printing technologies	Mopria Print Service, HP ePrint, Google Cloud Print, Apple AirPrint
Standard interfaces	Ethernet, USB 2.0
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	15 - 30 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 80 %
HP Management tools	HP Proxy Agent Software; HP Imaging and Printing Security Center; HP Utility (Mac); HP Device Toolbox (Win 7)
HP Software provided	HP Software Installer/Uninstaller, HP PCL 6 Printer Driver, HP Device Experience (DXP), HP Update, Product Registration Assist, HP Web Services Assist (HP Connected), HP Device Toolbox, HP Product Improvement Study
Included black & color (CMYK) cartridges capacity	1200 pages
Package depth	379 mm
Package width	497 mm
Package height	583 mm
Package weight	22000 g
Number of cartons per pallet layer	6 pc(s)
Harmonized System (HS) code	84433210
Recommended system requirements	Windows Vista (32 & 64-bit) or newer, 233 MHz processer or higher, 512 MB RAM, 400 MB available hard disk space, CD-ROM or Internet, USB or network connection