Dansk ............. 16
Català ............. 13
Español ........... 11
Italiano ............. 9
Deutsch ............. 6
Français ............ 3
English .............. 1
Nederlands ...... 18
Norsk .............. 22
Suomi ............. 20
Svenska .......... 26
Português ....... 24
4. Select a connection method and prepare for software installation
Windows
1. Do not connect the USB cable before installing the software.
Ifthe cable is already connected, disconnect it before continuing.
The installation process prompts to connect the cable at the
appropriate time.
2. Continue with “5. Locate or download the software installation les.”
NOTE: During software installation, select the option to Directly
connect this computer using a USB cable. (Windows only)
Mac
1. For Mac, connect the USB cable between the computer and the
printer before installing the software.
2. Continue with “5. Locate or download the software installation les.”
Built-in wireless network connection
1. Touch the Connection Information button.
2. Touch the Network Wi-Fi OFF button.
3. Touch the Settings button.
4. Touch the Wireless Setup Wizard item.
5. Select the correct network SSID from the list. If you do not
see the SSID, touch Enter SSID and provide the network SSID
manually.
6. Use the keyboard to enter the passphrase, and then touch the OK
button.
7. Wait while the printer establishes a network connection.
8. Touch the Connection Information
button. If an IP address
is listed, the network connection has been established. If not,
wait a few more minutes and try again. Note the IP address
for use during software installation. Example IP address:
192.168.0.1
9. To print from a computer, continue with “5. Locate or download
the software installation les.” To print from a phone or tablet
only, continue with “7. Mobile and wireless printing.”
NOTE: During software installation, select the option to Connect
through a network. (Windows only)
Manually congure the IP address
See the printer user guide for information on how to manually congure
the IP address. See the “Troubleshooting” section of this guide.
Wired (Ethernet) network connection
Use a standard network cable. (Cable not included.)
1. Connect the network cable to the printer and to the network. Wait
a few minutes for the printer to acquire a network address.
2. On the control panel, touch the Connection Information
button. If an IP address is listed, the network connection has been
established. If not, wait a few more minutes and try again. Note
the IP address for use during software installation. Example IP
address: 192.168.0.1
To manually congure the IP address, see “Manually congure the
IP address.”
3. Continue with “5. Locate or download the software installation les.”
NOTE: During software installation, select the option to Connect
through a network. (Windows only)
Color LaserJet Pro M452dw
Getting Started Guide
IMPORTANT:
Follow Steps 1 - 2 on the
printer hardware setup
poster, and then continue
with Step 3.
3. Initial setup on the control panel
After turning on the printer, wait for it to initialize. To navigate the control panel, use touch,
swipe, and scroll gestures. Follow the prompts on the control panel to congure these settings:
• Language
• Location
• Default Settings
Under Default Settings select one of these options:
• Self-managed: Optimized default settings for most users that include guided setup
and conguration steps and automatic updates.
• IT-managed: Optimized default settings for eet manageability.
Settings are fully customizable after initial setup.
NOTE: Select Print Information Page to print a page that instructs how to change the
default settings.
NOTE: Touch the Help button on the printer control panel to access help topics.
www.hp.com/support/colorljM452 www.register.hp.com
USB connection directly between the
printer and the computer
Use an A-to-B type USB cable (not included with all models).
CF388-90982_Gemini_GSG_reduced_tscreen.indd 1 19-03-2015 22:23:47
To Next Page
Need help?
General
Weight and Dimensions
